Rust and oxide layer on the metal is usually cleaned with acid remover chemicals in acidic environment and treated surface is prepared for the next
process. In electroless or electro coating lines, pre-cleaning is provided with rust-removing products, ensuring that the coatings are made without defects.
While removing rust, degreasing process can be done at the same time. With the help of inhibitors, metal wear can be prevented.
Rust removal job can be applied at ambient temperature and if the bath temperature is raised, more effective results can be obtained with shorter treatment time. The rust remover concentration and processing time are determined according to the amount of rust and scale on the metal parts. On extremely rusty and greasy surfaces, the bath concentration should be higher or the process time should be kept longer.
Rust and scale cleaning product that can be used with dipping method for iron and steel materials. It is ideal for use at ambient temperature at a concentration of 20 - 50%. It is especially used for rust and scale cleaning of the parts coming out of the degreasing bath before phosphating.
Phosphoric acid based rust removal and degreasing product that can be used for dipping, brushing or hand wiping for metal surfaces. Provides temporary protection for parts that tend to rust rapidly after cleaning. It can be used at a concentration of 20 - 50% depending on the amount of rust and grease on the metal surface.
Rust removal and degreasing product that can be used with dipping method for iron and steel materials. Thanks to contaning surfactants and inhibitors, it provides effective degreasing and wear protection. It is suitable to use before phosphating baths. Effective at a concentration of 10 - 50% and a temperature range of 20 - 50 ⁰C.
Used by dipping method for general metal surfaces. Rust removal and degreasing product containing different acid types. Apart from rust and oxide layer, it provides effective cleaning especially for heavy greasy surfaces. Concentration, temperature and application time can be changed according to the general condition of the surface to be cleaned.